Steelmaking Course 2020

Submitted Wed, 11/20/2019 - 16:06
Curso de Fabricación de Acero para obtener Calidad

 

This is the first edition of this course, born from the demand of the sector, collected from the assistants to the course of "Hot Rolling of Long Products" among others, to offer training and new points of view to professionals in the sector. In these four years, we see that this type of course interests senior professionals as well as junior or recent professionals in the sector, since they find the opportunity to acquire new points of view on technical content, as well as new methods and ideas or discuss on how to analyze their particular case.

The course is structured in five parts,

General Description

It is a general presentation of the processes of Foundry and Laddle Refining, as well as the chemistry of specific processes, and refractory.

BOS / BOF

Description of the manufacturing process of oxygen-based steelmaking, desulfurization, blowing, additions, decarburization, load balancing, etc..

Concast

This part focuses especially on everything that influences the quality of the resulting product, cleaning, inclusions, surface quality, cracks, internal quality, solidification, segregations, etc.

EAF

It will show how electric energy is supplied and these facilities will be described. It will explain how EAF furnaces are designed, and how they are used, as well as the fusion process is planned and steps for this first steel in this route.

Key players

Laddle Refining or Secondary Metallurgy

The processes of this step will be described, such as deoxidation and alloying, slag control, homogenization, temperatures, degasification, etc.

Workshops

Five workshops will be developed:

  • BOS Charge Balance Model
  • Characterization of Slab Quality
  • Steel University Simulations: Choice of BOS and/or Continuous Casting
  • EAF Scrap Types and Least Cost Mix
  • Steel University Simulations: Choice of EAF and / or Ladle Steelmaking



Attendee profile, based in 'Hot Rolling of Long Products' Course

Registrations and Prices

Registering will be open as long as there are available seats.

The course includes lunch and coffees for day 5th and 6th March 2020.

  • For registrations payed before January the 20th:

         € 1150 for a single person, € 950 per person if two attendees from the same company, € 890 per person in case three people or more from the same company.

  • For registrations payed after January the 20th 2020 and before 5th March 2020: € 1180 per person

In case anyone wanting to access the course on the same day 5 without prior registration, the price will be € 1180 per person, but available seats or the documentation that is delivered to each person are not guaranteed

Location

     Hotel NH Príncipe de Vergara

     C/ Príncipe de Vergara, 92 

     28006 Madrid. SPAIN.

     Tel: (+34) 913 98 46 61

     See location on map

We appreciate that this course can be widely disseminated.

Curso - pdf Course Description and Registration Form

Curso - pdf Contents Schedule

More References:

Link to 2019 Rolling Mill course

Link to 2018 Rolling Mill course

Link to 2017 Rolling Mill Course course

 

Service Type
Title short

Steelmaking Course 2020

Body brief

Steelmaking course showing both main routes (integral & EAF)

/en/article/steelmaking-course-2020

Hot Rolling Training Course 2019

Submitted Mon, 01/07/2019 - 23:10
Curso de Laminación 2019 - Hot Rolling Course 2019

 

This is the third edition of this course that tries to offer training and new technical and market points of view to professionals in the steel sector especially. In these three years we have learned that training is not only of interest for new professionals, but that it is mostly of the interest of senior professionals, who find an opportunity to acquire new points of view on technical issues and new methods and ideas on how to analyze their particular case

The course is structured in four parts,

Market vision

It consists of an initial presentation on how we see the sector from ATEC+ID, in terms of growth and other relevant factors.

Metallurgy

An exhibition of the characteristics and decisive steps of the rolling process is made, widely considered (including continuous casting), to assess the influence of different aspects, and qualities of steel to be obtained.

Roll Pass Design

This section is very important and we take care of it, since it is the content that can allow to roll new products by shape and quality, together with certain metallurgical aspects. In rolling, nothing is separated watertight, passes and metallurgy are important for obtaining different qualities.



Aplicación de ATEC+ID's Roll Pass Design and Management Application

Novelty!

This year we introduce as a novelty, the application of theoretical principles to reality, we will describe and show what the ATEC+ID design system is, at a detailed level.

Productivity and Efficiency

At this section we make a revision of all the steps from rolling to final product condition, making enphasis at the steps and bottle necks at the finishing mill in order to get a maximum productivity and efficiency, and in terms of quality.

Key players

Part of 27 attendeess to year 2019 course

Registration and Prices

Registration can be made at any time while there are seats.

The course includes lunch on days 14th and 15th as well as coffee breaks.

  • For registrations with course payment before February 5:

€ 1150 for 1 person, € 950 / person for two people, € 890 / person for three or more people from the same company.

  • For registration with course payment after 5th Februay and before March 12:

         € 1180 / person

In the case of people who want to access the course on the same day, without having made the previous registration, the price will be € 1180/person, but the availability of free places and the documentation that is delivered to each attendee is not guaranteed.

Location

You can ask us for a room reservation code, maybe get a better price.

     Hotel NH Collection Colón

     Calle Marqués de Zurgena, 4. 

     28001 Madrid. SPAIN.

     Tel: (+34) 913 98 46 61

     See location on map

We appreciate that this course can be widely disseminated.

Curso - pdf Course Description and Registration Form

Curso - pdf Contents Schedule

 

More References:

Link to 2018 course

Link to 2017 course

Service Type
Title short

Steel Hot Rolling Course 2019

Body brief

Hot Rolling Course 2019 in Madrid (Spain), 14th and 15th March

/en/article/hot-rolling-training-course-2019

Hot Rolling 2018: "A Great Result"

Submitted Sat, 03/17/2018 - 22:44
Asistentes al curso

Again, this year (14-15 March 2018), we have enjoyed great professionals from the most important companies in the training-course of "Long Products Hot Lamination", together with the representation of UNESID, and the collaboration of Sistemas de Lubrication and Lubrication SL with a specific presentation by Francisco J Rosa.

It is the second year that we managed to take this course forward, so we are very satisfied, to share technical content and provide this area of ​​contact with the sector. We will continue developing new content for next year. We thank those institutions, companies and people who have facilitated the access and use of their material, and who remains in the knowledge of the attendees, and we take the opportunity to communicate to suppliers, engineers, researchers, and anyone in the sector, that we keep open the possibility of collaborating with technical contents in next year's edition, to analyze presentations that are of interest to the sector, and which we will study with pleasure.

.

Key players
Title short

Hot Rolling 2018

Body brief

We have enjoyed great professionals and collaborators in the course of "Hot Lamination of Long Products"

/en/article/hot-rolling-2018-great-result

Course: Good Distribution Practices of Medicines (GDP)

Submitted Thu, 10/26/2017 - 12:55
Cours: Bonnes pratiques de distribution des médicaments (GDP)

The Good Practices for the Distribution of Medicines for Human Use (GDP Good Distribution Practices) have a fundamental role in the quality of medicines and thermolabile that reach the European distribution network, Spanish, and finally the patient, customer or consumer. This quality has to be guaranteed, and for this, quality management systems are implemented following the guidelines of the European Commission, which depending on the role of each company or organization in the distribution chain, have a generic nature of their activities , or more specific and key, as is the case of Transportation. Whether the activity is properly drug distribution, subject to authorization, such as the case of companies or freelancers who provide transport services, or subcontracted services of another type, is very important, and in some cases mandatory to know and train in the GDP of medicines..

At ATEC+ID we have been working with both the Farma sector and the Transport sector for both consulting and training services, and we now offer this course to provide training support to both sectors and bring the different experiences that have come developing in the course of these first years of entry into force of the Guidelines.

Attached below is the link to the registration document, which you can send us by filling in directly by e-mail or by sending an e-mail to info@atecid.com to make the reservation of the place or for us to expand the information, or you can Contact us through the form of contact of this web or through the telephone numbers (+34) 91 710 50 88 (+34) 665 608 533, we will be happy to extend the information.

We thank you for the maximum dissemination of this course.

Curso - pdf Course description and registration

 
Title short

Course: GDP in Medicines Distribution

Body brief

Course: Good Distribution Practices of Medicines (GDP)

/en/article/course-good-distribution-practices-medicines-gdp

TWI and In-Company Training

Submitted Tue, 06/07/2016 - 19:51
TWI et In-Company Training

 

Training is key for a company to develop its activity without compromising quality, both internal and external, as well as efficiency in its operations and processes. When new requirements or opportunities appear, you need to make an effort to identify what internal needs, and what training needs or general training are revealed, because failure to do so would be assuming an unknown learning curve slope, as well as the occurrence of errors and inefficiencies. Do we really realize that we assume this?, and are we taking it for good? Do we know the cost is for both our personal and company reputation?

It is possible to identify real clear cases that have appeared and are appearing about training needs, for example the upgrade to ISO 9001:2015, ISO 14001:2015, the GDPs by pharmaceutical companies, and especially transportation companies, as new additions to LEAN Six Sigma and Lean, and we could indentify countless cases.

TWI (Training Within Industry) is associated with LEAN, and especially Lean Manufacturing in their approach to the need for middle managers with LEAN management capabilities, as these capabilities are different from the usual or traditional management plant. However, today there is a tendency to merge what is called In Company Training, or training in company with the concept or goal of TWI, to extend this idea to any middle management and even recently installed department directors, and provide training and assistance in adaptation to management styles, styles which can be LEAN, ISO 9001:2015, or others.

Ask us for In-Company training programmes, are certainly very interesting.

Service Type
Title short

TWI and In-Company Training

Body brief

TWI and In-Company Training

/en/article/twi-and-company-training

Hot Rolling of Steel Long Products - Training Course 2017

Submitted Wed, 12/21/2016 - 13:26
Cours de Laminage á Chaud de Produits Longs 2017

 

After many years of work and evolution in the sector, we are offering this course of hot rolling of long products, with the intention of being useful for many professionals and companies, and to satisfy their demand. The hot rolling of long steel products has its majority destination in construction, but also in other sectors. In the last decades a great evolution is taking place in the production of high strength steels, in different ways to obtain them, in the technology applied to obtain certain sections, in the machinery used for it, and in general in the design of the rolling processes.

We attach the links to download the call and the registration form, which should be sent to us filled out directly via e-mail  send an e-mail to info@atecid.com for seat reservations or to get more details, or you can Contact us trough the contact form in this website, we will be happy to provide more information.

We are grateful for the full dissemination of information about this training course.

Curso - pdf Training Course Description

Curso - pdf Course Program

También puede enviarnos sus datos directamente en un e-mail.

Assessment of this first course

This first training course or meeting of "Hot Rolling of Long Products" has contributed many things, in different areas, both the attendees, with whom we have exchanged many interesting views, as well as ourselves, to improve and focus the content of the future 2018 call, since it is our intention to hold this meeting annually. There were representatives or members of the main steel groups, and a certain foreign representation, European and Asian, which fills us with satisfaction.

In this first edition have been exposed the metallurgical technical bases, the forming in rolling and roll pass design, and the aspects to obtain good productivities and efficiencies, as well as a brief exposure of the market. These are very broad to deal with in great detail and two intense days, but they serve as a technical basis and starting point. In the future we hope to address more detailed and specific issues of each product, and types of mills, boxes, temperatures, grades, etc.

This type of meeting, in addition to the contents themselves, is interesting for the exchange of opinions and views among professionals in the sector, in a professional and relaxed environment, away from the usual daily activity that provides and tries to facilitate a few hours to gain perspective and be able to contemplate and analyze aspects of rolling, from a certain distance from the daily pressure of the mill.

We thank those institutions, companies and individuals who have facilitated the access and use of their material, and that remains in the knowledge of the attendees, and we take the opportunity to communicate to suppliers, engineers, researchers, and anyone in the sector, who from now on we have the possibility of collaborating in next year's edition, to analyze presentations that are of interest to the sector, that we will study with pleasure.  

Key players

Although not all attendees could stay till the end, we took good pictures for our memories

Fair installations

We enjoyed good facilities

 

 

Service Type
Title short

Hot Rolling of Steel Long Products 2017

Body brief

Curso de Laminación en Caliente de Productos Largos 2017

/en/article/hot-rolling-steel-long-products-training-course-2017
Subscribe to Formación - Training